Building Department
|

Mark Lewis
Chief Building Official |
Click here for Fee Schedule
The Building Department enhances the general safety, health
and welfare of the public through the adoption and enforcement
of the most current building, electrical, plumbing and other
codes. The department also regulates and maintains all
township building and zoning codes.
The goal of the Building Department is to provide the
highest quality service with the greatest efficiency. The
customers for the department are external and internal; They
include the general public, contractors, design professionals,
legal professionals, the Fire Department, Planning and
Engineering Department, and representatives of various state
agencies.
Code enforcement plays an important role in the community,
not only with regard to new construction, but also with the
repair and alteration of existing buildings. Because the
building industry is ever changing, code enforcement personnel
must stay informed regarding new materials, processes and
practices. The department exerts a positive influence on the
environment and contributes to the economic health and well
being of the community as both an educator and valuable
resource.
Location
9955 N. Haggerty Road
First Floor
Plymouth, MI 48170
Hours
8:00 am to 4:30 pm (unless otherwise noted)
Contacts
Office
(734) 354-3210
Office Fax#: (734) 207-2689
Mark
A. Lewis, Chief Building Official
(734) 354-3211
Residential Inspector
(734) 354-3210
Dino Bona, Electrical
Inspector
(734) 354-3209
Ken Doletzky, Plumbing
Inspector
(734) 394-5213 (Hours: 8:30 am - 9:30 am, 4:00 pm -
5:00 pm)
Steve Munson, Plumbing
Inspector
(734) 394-5212 (Hours: 8:30am - 9:30 am, 4:00 pm - 5:00
pm)
Bill Moy, Heating/Cooling
Inspector
(734) 394-5215 (Hours: 8:30 am - 9:30 am, 4:00 pm -
5:00 pm)
Duane Buono, Heating/Cooling
Inspector
(734) 394-5214 (Hours: 8:30 am - 9:30 am, 4:00 pm -
5:00 pm)
Plan Reviewer
(Residential)
(734) 354-3210
Kathryn Pumphrey, Ordinance Officer
(734) 354-3205
Permit/Inspection Line
(734) 453-3840, ext. 339 (Permits usually have at least
two inspections - a rough and a final. Most inspections should
be scheduled by 2:00 pm the day before the inspection is
required.)
|